| Printing method |
Direct thermal printing |
| Print width |
1-inch, 192dots |
| Resolution |
8 dots/mm |
| Characters per line |
24cpl (8 x 16) |
| Printing speed |
80mm/sec (MAX) |
| Dimensions |
68 x 119 x 32.5mm |
| Weight |
Without paper: 211.5g
With paper: 220g |
| Paper supplied |
Thermal paper roll (37mm wide, ø20mm) |
| Interface |
Serial (RS-232C), Bluetooth |
| GPS Receiver |
C3-370B Jnavi (SiRFstarTMIII) |
| Paper roll |
Thermal roll paper (57mm wide, 40ø) |
| MSR |
Triple Tracks Reading (1 & 2 & 3 tracks) |
| Smart Card Reader |
ISO 7816 Compliant (EMV Level 1 Certified)
T=0, T=1 support / 1 SAM (Security Application Module) |
| Barcode |
UPC, EAN, KAN, JAN, CODABAR, Code128, Code39, I2/5, Code93, PDF417, QR-CODE, DATAMATRIX |
| Processor |
32bits RISC (Samsung, ARM7) |
| Memory |
FLASH : 32Mbits, SDRAM : 64Mbits |
| Receive buffer size |
1M bytes |
| Motor |
2 Phase bipolar stepping motor |
| Paper Sensor |
Paper empty |
| Battery |
Rechargeable 7.4VDC, 1100mAh (Li-ion) |
| Battery Duration |
1 hour continuous printing |
| Battery Charger |
Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time |
| Control commands |
ESC/POS compatible |
| Status detections |
Battery level low detection with LED indication
Paper out detection |
| Print density control |
Automatic printing density control |
| Print-head life |
Approximately 50km |
| Environment conditions |
Operating temperature : -10°C～+50°C;
Storage temperature : -15°C～+70°C;
Operating Humidity : 30%～80% (no condensation)
Storage Humidity : 10%～90% (no condensation) |
| Temperature Compensation |
Automatic temperature compensation of print-head |